Protecting Your Wood With A Dehumidifier

by ,

Wood is a tricky material to work with. If enough moisture builds up inside of a piece of wood, it can warp. Have you ever seen a piece of hardwood floor that has moisture buildup inside of it? It was probably twisted or out of line with the rest of the pieces. If you just bought or built a home with hardwood flooring or wood paneling, you should know how to best deal with the moisture that can accumulate inside of your home, potentially ruining those beautiful floors or walls.

Why A Dehumidifier?

Out of all the products you could possibly use to keep your hardwood floors beautiful, why would one want to use a dehumidifier? After all, they’re expensive and you have to buy one for each room you want to protect, correct? Wrong! Believe it or not, dehumidifiers are a very affordable product and they come in a variety of different models, types, sizes, and shapes. They can be integrated into the air conditioning unit in your home as a whole house unit, or you can buy one for each room you want to protect. Reading up on some of the most recent dehumidifier reviews will give you a better understanding of which ones do best in what areas.

Keeping Your Hardwood Floors Maintained

Wooden houses usually contain a lot of hardwood and wood walls, so it’s a good idea to know how to keep these areas well maintained. You can’t neglect the upkeep on these types of homes and hardwood flooring can be expensive to replace if damaged. When it comes to the flooring, it’s best to start off with a little preventative maintenance. This means placing floor mats outside of each door to minimize the amount of dirt being tracked in, especially when shoes are wet and muddy.


Cleaning the floors are a totally different story. You should first dust the area with a mop that  with a dusting agent in it. This will pick up any loose debris that could scratch the wood, allowing moisture to get inside even easier. Vacuum the area with a floor-brush tool, not a beater bar. If you have a lot of dirt, oil, and grime built up, consider a wood-cleaning product that is diluted according to the care instructions. Clean the floor with a slightly dampened sponge  and use that to clean the area. Avoid standing water because this can damage the wood.

Removing Marks

If your floor has marks on it from heels, oil-based stains, water marks, or dark spots and pet stains, there are simple ways you can remove them from your flooring. For dark spots or unsightly pet stains, rub the spot with 000 steel wool and floor wax. For heel marks, use steel wool that’s fine to rub in the wax for hardwood flooring. For oil-based stains, rub the area with a soft cloth and some dish detergent to break the grease down. Rinse it with clear water and repeat as needed. If your floor has water marks, use the 000 steel wool and wax for flooring.


Keeping your beautiful hardwood floors clean and moisture free is easy if you can keep up with the maintenance. All it takes is some elbow grease and a dehumidifier to keep moisture from warping the wood. Hardwood flooring is expensive and it would be a shame to have it ruined by humidity.

Leave a Reply

Your email address will not be published. Required fields are marked *